The damage of your turbocharger will cause a decline in the performance of your vehicle. Moreover, if the degradation of the component is severe, the automobile might break down prematurely, and you will need to pay high fees for restoration. Therefore, you must be diligent in keeping your turbo system protected against potential causes of damage. Here are practical tips to help you avoid common turbocharger problems.
Avoid Overspeeding
You should avoid pushing your turbocharger beyond its limit through over speeding. Excess speed will accelerate the damage of the component ad eventual breakdown of the vehicle. In simple terms, you will not always increase the power boost in your automobile after pushing the turbo beyond the recommended limits. Instead, the high sped will generate excessive drive pressure, and the turbocharger and connected elements will not be able to handle the stress. For example, the turbine powering the turbo will fall apart due to the production of too much exhaust when driving at extreme speeds. You should prevent mishaps by keeping your vehicle speeds at the recommended limits.
Prevent Foreign Object Damage
Your turbocharger will degrade fast if a foreign object infiltrates the system. For example, if dirty filters, debris or rags enter the turbo, eventual failure will occur. In most cases, the damage will occur when the foreign materials pass the compressor wheel and its blades. The blades will be distorted by the impact caused by the foreign object. Also, the inducer bore on which the compressor wheel is installed will show signs of scarring due to contact with unusual objects.
You should protect your turbocharger against damage by installing a quality filter to minimise the flow of debris. Also, you should be cautious when repairing your turbo to prevent accidental entry of unusual items into the system.
Manage Lubrication Issues
You should ensure that there is sufficient oil available for lubricating the internal components of your turbocharger at all times. In general, there are multiple moving parts in a typical turbo system. These elements will produce friction if they are not well lubricated. The friction will compromise the efficiency of turbo operations. In addition, it will increase the speed of wear of affected components and even the level of heat produced will be high. Therefore, you must provide the required oil for optimal lubrication.
Remember to protect your turbocharger against the dangers of oil contamination. You should use the oil approved by the manufacturer, and it should be filtered and in good condition for exceptional performance. For further assistance, contact local turbo services.